Available, Reply within 24h · Antibes · 06 · 83 · 13
04 22 46 06 04

Article

Attacked roof timbers: termites, house longhorn beetle or dry rot, reading the signs before treating

16 November 2026

The essentials in thirty seconds

A hole in a beam does not say who made it, whether the attack is still active, or whether enough wood is left. Three questions, in this order: which pest, why here, what remains.

  • The pest is read from its signs. An oval flight hole of about 5 to 10 mm: house longhorn beetle, in softwoods. Mud tubes: subterranean termites. Pellets and galleries in dry wood with no link to the ground: think of the dry-wood termite, present on the Mediterranean coast.
  • Wood moisture is the second diagnosis. Dry rot growth is inhibited below about 20% wood moisture, and the house longhorn beetle generally settles below 30%. Treating without correcting the moisture only postpones the problem.
  • A treatment has no mechanical function. It stops the insects, it does not give strength back: on a 100 × 200 mm beam, 10 mm lost on every face removes 28% of the section but 35% of the bending resistance (geometry calculation below).
  • The sale-time report is a visual inspection. It covers visible and accessible parts: a negative result does not rule out a risk hidden under insulation or an attic floor.
  • The legal framework exists. Declaration to the town hall when termites are found, a termite status report for a sale in a zone set by prefectoral order, valid for six months.

This article is for owners, buyers, managing agents and professionals who face a suspect roof frame, a treatment quote or a diagnostic report, and want to understand what these documents say and what they leave out. It gives checked reference points and one calculation, and flags what remains an order of magnitude.

Diagram of a traditional roof truss: tie beam, rafters, king post, bearings on the wallsThe two bearings of the tie beam on the walls are circled: they are the first areas to examine.Tie beamRafterKing postBearing on the wallBearing on the wall
Traditional roof truss. The bearings and timber ends, circled, are the first areas to examine: wood in contact with masonry, trapped moisture, and the members most stressed in shear.

Who is attacking the wood? Six pests, six readings

The sorting rests on three signs: the shape and size of the hole, the nature of the droppings, and the presence or absence of moisture. None is enough alone.

Pest Wood attacked Visible signs Key point
Subterranean termites (Reticulitermes) Wood in contact with the ground or in a damp setting Mud tubes along walls and foundations, internal galleries, a thin intact surface skin, wings after the swarm The wood sounds hollow under a sound-looking surface: sounding matters more than looking.
Dry-wood termite (Kalotermes flavicollis) Dry wood, including roof frames Galleries in the wood, dry pellets under the attacked area Present in the dry woods of the French Mediterranean region; a CIRAD study describes damage that is occasional and localised, with treatment limited to the attacked areas.
House longhorn beetle (Hylotrupes bajulus) Sapwood of softwoods: roof frames, skirting, floors, interior joinery Oval flight holes, about 5 to 10 mm depending on the source; sawdust and pellets; large larval galleries The larvae do the damage, over several years (3 to 10 years depending on the source). The adult emerges in summer and lives about two weeks at most.
Furniture beetles and powderpost beetles Furniture, woodwork, hardwoods Smaller round holes, fine powder The diameter and shape of the flight hole is the first sort: do not mistake them for the longhorn beetle.
Dry rot (Serpula lacrymans) Damp, usually poorly ventilated wood Cuboidal cracking, a veil of mycelium, a mushroom smell Not an insect: an insecticide changes nothing, the cause is moisture.
Cellar fungus (Coniophora puteana) Very damp wood Brownish cracked wood, often local, near a leak It needs wetter wood than dry rot: a cellar fungus colony points to a nearby leak or infiltration.

A roof frame can carry several agents: a longhorn beetle settled in the sapwood of a sound softwood, a fungus where the roof lets water through. A single hole therefore does not close the diagnosis.

Examining a roof frame, in order

  1. Reach every member, including bearings and timber ends, often hidden by insulation, an attic floor or the roof edges. An inspection limited to accessible parts says so in its report.
  2. Record first, touch second. A rough plan of the frame, a number for each member, dated photographs, before any probing destroys a sign.
  3. Look for external signs: sawdust and pellets on the floor under the member, flight holes, mud tubes, wings, damp marks on the underside of the roofing.
  4. Sound it with an awl or screwdriver: wood that sounds hollow or gives way under a sound-looking surface is attacked in depth.
  5. Measure the wood moisture with a pin-type meter. On wood, unlike on a wall, this tool reads within its calibration range, with species and temperature corrections. Several points per member, dry ones as well as suspect ones (see our article on reading moisture meters).
  6. Look at the invisible: endoscope in cavities and galleries, acoustic detection of insect activity.
  7. Measure the sections: thickness of sound wood left at the awl, deflections of the members. These values feed the section calculation below.
  8. Write it up member by member: what is seen, what is measured, what is deduced, and what could not be examined.

Wood moisture decides almost everything

Each pest has its own moisture range. The values below come from mixed sources (technical sheets, course notes, administration documents): they are reference points, not laboratory thresholds.

Wood moisture What it allows
Less than 20% Dry rot growth inhibited according to several sources, but a colony already established can keep degrading drier wood. The longhorn beetle and the dry-wood termite are not stopped.
20% to 30% Wood-rotting fungi possible (dry rot: 22 to 35% or 20 to 40% depending on the source). Longhorn beetle still possible.
More than 30% Fungi favoured. Longhorn beetle disfavoured according to the sources, which put its limit below 30%. Subterranean termites, for their part, seek damp wood.

What this changes: wood at 12% attacked by longhorn beetles is treated as an insect problem; wood at 25% attacked or rotten is treated first as a cause problem. Where does the water come from? A roof that lets rain through (see our damp diagnosis page), condensation under the roof or on a pipe (see the downpipe condensation article), an unventilated attic, or a rise through the masonry at the bearings.

How much wood is left? A geometry calculation

Treating stops the insect; the mechanical question lies elsewhere. For a rectangular beam of width b and height h, bending resistance is proportional to the section modulus:

W = b · h² / 6

The height is squared: a loss of wood at the surface removes more resistance than material. Here is a 100 × 200 mm beam whose four faces each lose a thickness d (pure geometry, remaining wood assumed sound):

Loss d on each face Remaining section Remaining bending resistance
0 mm 100% 100%
5 mm 86% 81%
10 mm 72% 65%
15 mm 60% 51%
20 mm 48% 38%

Reading: at 10 mm lost per face, 72% of the section and 65% of the bending resistance remain. At 20 mm, 38% of the resistance remains. Keep the limits of the calculation in mind: the longhorn beetle eats only the sapwood, so its loss is bounded by the sapwood thickness; termites hollow out from the inside without changing the look of the surface; and at the bearings shear governs, which this calculation does not cover.

This is not the check a structural engineer would make under Eurocode 5 (EN 1995-1-1). There is no universal loss threshold: keeping, strengthening or replacing a member is a matter of calculation with its loads and bearings.

Treating: what each solution solves and what it does not

Solution What it solves What it does not solve
Curative wood treatment (injection, brush-on, spray) Kills the insects present, depending on the product and its penetration Gives no strength back, does not treat moisture. Protection duration depends on the product: ask for it in writing.
Heat treatment or fumigation (extensive cases) Acts on the whole treated volume, including inaccessible parts Does not durably protect against reinfestation. Reserved for equipped firms.
Barrier against subterranean termites (physical or chemical, in the ground or at the foot of walls) Blocks the passage from the ground No effect on a dry-wood termite, which does not come through the ground, nor on a colony already in the timbers.
Replacing or strengthening members (sistering, shoe, stirrup) Restores the mechanical function Useless if the moisture cause remains. Justified by a calculation or a survey of sections.
Correcting the cause (roofing, attic ventilation, bearings) Removes the condition that allowed the attack, above all for fungi Does not eradicate an insect already present.

The order that follows: correct the moisture, treat the attack, restore the structure, then protect. Reversing them, for example treating wood that keeps receiving water, is the commonest flaw of a quote that talks only about product.

Comparing quotes: seven questions, in writing

Question What the answer must contain
Which pest, on what evidence? Identification (photos, sample) and attacked areas marked on a plan.
What surfaces or lengths? Quantities per room, so that prices are comparable.
Which product, which method? Product name, technical sheet, application method, dose.
Which cause is treated? Moisture, roofing, ventilation: treated, priced separately or excluded.
Which members are replaced or strengthened? List and justification, by calculation or survey.
What warranty from the firm, on what conditions? Duration, conditions (maintenance, inspection), written certificate.
What insurance? A valid insurance certificate from the firm.

We do not publish a price range per square metre: it varies too much with the method, the access and the extent to be honest. Three quotes built on the same specification are worth more than an average.

Sale, co-ownership, new build: the framework

  • Sale in a designated zone. Article L126-24 of the Code de la construction et de l’habitation requires, for the sale of a built property located in a zone set by prefectoral order, a termite status report, under the conditions of articles L271-4 to L271-6. It is valid for six months; depending on the source the start date is the date of the inspection, and the dates of the preliminary contract and the final deed should be checked with the notary.
  • What the diagnosis covers. A visual inspection of visible and accessible parts. A roof frame under insulation, or an attic whose floor cannot be lifted, escapes the examination. The report targets termites: longhorn beetles and fungi call for a separate examination, to be requested explicitly.
  • Declaration to the town hall. When termites are present, the declaration falls to the occupant, failing that the owner (article L126-4), within one month according to the sheets we consulted (article R126-2).
  • Hidden defect. A defect that is not apparent and unknown to the buyer may fall under article 1641 of the Civil Code; the action is time-barred two years after the defect is discovered (article 1648). A no-warranty clause does not protect a seller who knew of the defect. Dating the attack is often the decisive point.
  • New build. In a designated zone, the building must be protected against termites (article L112-17 and the order of 27 June 2006), with a technical notice handed over no later than the acceptance of the works. Damage that compromises solidity may fall under the ten-year warranty.
  • Co-ownership. The roof frame is in principle a common part: action falls to the managing agent and works are voted at the general meeting. The co-ownership rules should be checked.

What is specific to 06 and 83

The zones subject to the termite status report are set by prefectoral order, commune by commune, and can change: before a sale, the town hall or the prefecture gives the perimeter in force. On the coast, the presence of the dry-wood termite is a reminder that a dry attic is not safe: absence of moisture rules out fungi, not this insect. Conversely, cellars, crawl spaces and poorly ventilated attics of older houses are where wood moisture exceeds the fungal thresholds.

Suspect roof frame, a quote to check, a report to challenge?

We are an independent building expertise firm. The statutory sale diagnosis is the work of a certified diagnostician; we examine the roof frame itself: signs, wood moisture, remaining sections, cause of the attack, consistency of a quote, and we write a report the parties can use. We sell neither treatment nor works. Free quote within 24 hours.

Describe my situationMoisture meter readingSee our rates

Glossary

Sapwood
the outer, pale part of the trunk; the main target of the house longhorn beetle.
Timber end
the end of a piece of timber, often built into the masonry, where moisture gets trapped.
Mud tube
an earth gallery built by subterranean termites to cross surfaces in open air.
Tie beam, rafter, king post
members of a truss: the tie beam is horizontal and links the feet, the rafters are the two sloping members, the king post is the central vertical member.
Termite status report
document drawn up by a diagnostician for a sale in a zone set by prefectoral order, valid for six months.
Section modulus
a geometric quantity, b·h²/6 for a rectangle, proportional to the bending resistance of a beam.
Flight hole
hole through which the adult insect leaves the wood; its shape and diameter help to identify the species.

Frequently asked questions

How do I know if I have termites in my roof frame?

The signs depend on the species: mud tubes and internal galleries for subterranean termites, pellets and galleries in dry wood for the dry-wood termite, wings near windows after the swarm. Wood that sounds hollow under an awl beneath a sound-looking surface is a strong sign. If in doubt, have the frame examined: sounding, moisture meter, endoscope, acoustic detection.

What does termite or longhorn beetle treatment cost?

It depends on the method, the access and the extent, and we do not publish a per-square-metre range. Ask for at least three quotes on the same specification: surfaces, product, cause treated, members replaced, the firm’s warranty.

How are longhorn beetles treated in a roof frame?

After the survey, curative wood treatment is done by injecting or applying an insecticide, or by heat in extensive cases. Members too badly damaged are strengthened or replaced, because a treatment does not give strength back. The wood moisture must also be checked, as it conditions the risk of fungi.

Does a negative termite diagnosis rule out all risk?

No. The termite status report is a visual inspection of visible and accessible parts, valid for six months. It says nothing of a frame hidden under insulation, and it targets termites: longhorn beetles and fungi need a separate examination.

Does a treatment give strength back to the wood?

No. It stops the insects or the fungi, but lost wood does not come back. On a 100 × 200 mm beam, 10 mm lost on every face removes 28% of the section and 35% of the bending resistance: the decision to strengthen or replace is made by calculation.

Must I declare termites to the town hall?

Yes. If termites are present, the declaration to the town hall falls to the occupant, failing that the owner (article L126-4 of the Code de la construction et de l’habitation), within one month according to the sheets we consulted.

References

The texts below were noted from Légifrance (article listings) and from State service pages on 16 November 2026. The consolidated texts were not re-read in full: check the version in force before acting.

  • Code de la construction et de l’habitation, articles L126-4, L126-24, R126-2 and L112-17; order of 27 June 2006 as amended (16 February 2010, 28 November 2014).
  • Civil Code, articles 1641 and 1648.
  • Standard NF P 03-201 on termite detection: 2016 edition according to the diagnosticians’ sheets consulted, to be checked.
  • Bois et Forêts des Tropiques (2004), paper on dry-wood termites in the French Mediterranean region: revues.cirad.fr.
  • Service interministériel des Archives de France (2007), sheet “La mérule”.
  • Eurocode 5, EN 1995-1-1, design of timber structures.

Values not checked against a single text: flight-hole diameter and longhorn beetle cycle length (sources disagree, hence the ranges), moisture ranges (mixed sources), the one-month declaration period and the six-month validity (State service and diagnostician sheets, without re-reading Légifrance). The residual-section table is a geometry calculation recomputed on 16 November 2026.

Survey carried out by Frédéric Faucouneau, independent building expert, Antibes, Alpes-Maritimes (06), Var (83), Bouches-du-Rhône (13). Last updated: 16 November 2026. Find out more

Last updated 16/11/2026 - Cassini Expertise, independent building expert, departments 06, 83 and 13.

Call First expert opinion: €45